Project One Assembly Guide
Steps
1 - Cut out board using the Gillotine
Make sure you cut just slightly outside the white line.
We want it to look like this:
2 - Solder Bottom Layer SMD components
Physical Assembly
Click here for the STL files for the 3D printed parts.
Components
SMD Components
You can download this as a file by clicking this link.
Resistors
| Designators | Value | Code | Quantity | Bin # |
|---|---|---|---|---|
R1 |
22R | 22 |
1 | 43 |
R2 R3 R4 R5 |
330R | 331 |
4 | 22 |
R6 |
120R | 121 |
1 | 7 |
Capacitors
| Designators | Value | Quantity | Bin # |
|---|---|---|---|
C1 C3 |
0.1 μF | 2 | 25 |
C2 |
4.7μF | 1 | 24 |
The 4.7μF capacitor is thicker than the 0.1μF capacitors.
LEDs
| Designators | Value | Quantity |
|---|---|---|
D1 D2 D3 |
BLUE | 3 |
You will need to solder these by hand.
Through-Hole Components
Bottom Side Components
- L298 Dual H-Bridge
- ISP Header
- Box Headers